Universal Gang ISP Programmer

Universal Gang ISP Programmer

Gang ISP features

• Program up to 16 serial devices simultaneously
• Up to 4 parallel ISP chips can be programmed simultaneously (eMMC, NAND and NOR FLASH)
• Multiple programmers can be set up for project expansion
• Custom adapter available for off-line production setup
• USB2.0, LAN and SD ports available
• Operation modes: USB online, network online and off-line
• Adjustable programming speed and industrial grade reliability
• DLL/API/Command-Line Commands available with authorization agreement from both parties (Initial solution for integrating�ISP sub-systems of ICT, FCT, ATE and testing fixture)
• Ideal for PCB panel production
CE and ROHS Compliant

Hardware Specification for Universal ISP

• High-speed ISP production programmer with industrial grade quality. The ultimate choice for integrating ISP sub-systems.
• Supports almost all serial chips which include, but not limited, SPI,I2C,JTAG, BDM,UART,MON,SCI,SWD, SBW,C2D,ICC,SWIM,SDQ,DBG,ICE,CSI,LIN
• Supported manufactures include, but not limited to ABOV, Ali, Altera, Atmel, Catalyst, Cypress, Freescale, Fujitsu, Haier, Hitachi, Hynix, Infineon,�IR, ISSI, Lattice, Macronix, Maxim, Microchip, Micron, NEC, Numonyx, NXP, ON, Panasonic,�Renesas, Rohm, Samsung, Sanyo, Silicon Labs, Spansion, SST, ST,�Teridian, TI, Toshiba, Winbond, �Xilinx, Zilog
• Programs up to 16 serial chips or 4 parallel NAND,NOR,eMMC chips simultaneously
• Support ISP serial programming to multiple chips of different models or types in one unit
• General control ports supply signal isolation, relay isolation, power supply control, click detection, LED expansion display and other control signals
• High-speed programming with adjustable speed meets board load requirement or ISP cable length
• Three modes: 1) Online mode. Connected to local PC by USB2.0(high speed) 2) Off-line mode. Using the stand-alone keyboard, LCD display, and mobile memory (standard SD cards), SuperPro IS03 can run independently off-line for flexible production and field setup. Project file size is only limited by the SD card memory size.3) Network mode. Connected to local network, control locally or remotely.
• Advanced pin-driver technology supplies cleaner signals, wider voltage range and accurate / higher clock frequency. Precise time generators ensure devices with 1.2V-5.0V Vcc higher speed and qualified product ratio
• Chip safety security mechanism: the built-in precise voltage self-calibration circuit ensures the voltage is within the preset range at any time. The self-diagnosis function continuously detects hardware fault to ensure the machine run normally.
• Over-current, over-voltage and ESD protection avoids damaging the programmers
• Powerful DLL, API, Command-Line Commands support Visual C, Visual Basic, Linux and Labview. SuperPro IS03 is easily integrated with ICT, FCT, ATE or testing fixture systems.
• Powerful software system with user-friendly interface: simplifies operation, improves efficiency and reduces mistakes
• Project. Simplifies processes such as device selection file loading, device configuration setting, program option, and batch file setting into one step
• Project Group. Organizes batch processing commands for multiple projects running simultaneously.
• Super Scale Project Group. Complicated PCBA or multiple combined PCBAs may need multiple programmers to work properly. The Super Scale Project Group is responsible for the work flow across multiple programmers.
• User operation interface is shown by PCBA
• Auto Commands. Permit users to create a one-step command to execute common commands such as erasing, space-checking, programming and verification
• Production Mode. Initiated by an external Start signal. Once the clamp is closed, the system runs automatically. As an off-line programmer, once the chips are inserted correctly into the sockets, Auto Commands will run automatically.
• Dynamic Buffer. Every chip may have different data to be written, and software can adjust by Xeltek per user's request (i.e. standard and customized series number generator � for MAC address).
• Log document and production statistics function facilitates quality-tracking.
• Copyright Protection with SD encryption, document right management and encryption, output limitation and remote control.
• Expansion. Users can control up to 12 machines simultaneously with a USB HUB or LAN SWITCH.
• Support JAM/STAPL Player and Direct C
• Support and recognize almost all known formats automatically
• Barcode management. Upload documents by scanning order barcodes to eliminate manual mistakes.
• Customized special functions and algorithm software available
• Web Programmer + Network management software (optional) create a revolutionary network writing management mode.���� Project setting, task switching and software updating for all programmers can be finished instantly on a server while quality-monitoring and QC statistic can be done in real time. Such mistakes as empty-writing can be tracked, and the written data is saved only on local or remote servers for data safety.
• Using a customized socket adapter, SuperPro IS03 can be used as an off-line production programmer, and programs up to 4 chips simultaneously.
• Compatible with WINDOWS 8/7/VISTA/XP
• CE and RoHS�Compliant

Software Specifications

• Supports almost all devices with ISP interface.
• Supports Jam and Staple files from ACTEL and ALTERA; Direct C files from ACTEL.
• Programming speed selectable (High, Normal and Low) for complicated applications such as different cable lengths, different target load characters.
• Dynamic buffer function. Application examples include device S/N, MAC address, frequency or transducer calibration etc.
• File format on SD: FAT16, FAT32.
• Functions for IP protection: Project security, SD security, batch control, administration management etc.
• API and DLL provided for easy integration into customers� system like ICT and ATE.
• Software provides the features for multiple units to work concurrently controlled by USB HUB.

Univerasal Gang ISP Contents

• One SuperProISP416 programmer
• 4 ISP cables
• One connecting cable for USB interface
• One SD card
• One AC power adapter (output DC 12V)

Device Support List