Waveshare Arduino Sensor Pack
Thirteen different sensors in one pack with easy connection to Arduino or other microcontroller boards
like STK200 and PIC-Kit. These sensors cover a huge range of measurement types and come with jumper leads
for easy connection. Arduino sketches are included for all sensors.
Sensitive to LPG, natural gas, coal gas and output voltage increases with the concentration of
the measured gases. Analog and digital outputs with adjustable sensitivity, 2.5 to 5V with dimensions of
40.0mm * 21.0mm. Ideal for gas detector.
Sensitive to flame spectrum, with analog and digital outputs. For detecting fire and flames.
Note that the sensor itself is not fireproof.
- Spectrum range: 760nm ~ 1100nm
- Detection angle: 0 - 60 degree
- Power: 3.3V ~ 5.3V
- Operating temperature: -25° ~ 85°
- Dimension: 27.3mm * 15.4mm
- Mounting holes size: 2.0mm
For motor speed measurement, object position detection, smart car or electronic bricks.
Adjustable sensitivity, with digital and analog outputs. Voltage 2.3V ~ 5.3V,
dimension: 27.0mm * 15.5mm
Infrared Reflective Sensor
For robot path tracking, obstacle-avoiding car or pipeline counter.
Adjustable sensitivity, with digital and analog outputs. Voltage 3.0V ~ 5.3V,
dimensions 25mm * 15.9mm.
For obstacle detection, pipeline counter, smart robot or obstacle-avoiding car.
With boost circuit and signal output indicator. Effective distance: 0.8m(typ), 1.5m(max),Voltage 2.5V ~ 5.0V
and dimensions of 47.7mm * 17.9mm.
For auto watering systems, flowerpot soil moisture detection or auto pouring systems.
Easy to insert into the soil with output voltage increasing with the soil moisture level.
Measures analog output with detection depth of 38mm, 2.0V ~ 5.0V and dimensions of 20.0mm * 51.0mm
Detects clockwise/anti-clockwise rotations in degrees and laps for positioning in Industrial Controls.
2 digital inputs with 15 pulses per lap. Power: 3.0V ~ 5.3V and dimensions of 32.1mm * 15.4mm.
For ambient sound detection and sound level detection. Features onboard audio power amplifier LM386
with audio signal gain up to 200 and adjustable accuracy. Analog and digital output, Mic sensitivity : 52dB,
Frequency range : 50Hz ~ 20KHz and Voltage : 3.3V ~ 5.3V.
This is a calibrated digital temperature and humidity module with onboard sensor DHT11. It can be used for detecting ambient
temperature and humidity, through the standard single-wire interface.
Temperature Resolution : 1°C, Accuracy : ±2°C, Measuring range : 0°C ~ 50°C
Humidity Resolution : 1%RH, Accuracy : ±5%RH (0~50°C), Measuring range : 20%RH ~ 90%RH (25°C).
Operating voltage : 3.3V ~ 5.5 V.
Detects shake signal. For Shake detection, Guard alarm, Smart car or Electric bricks.
Dimension: 19.0mm * 16.0mm, operating voltage : 3.0V ~ 5.5 V. Simple digital output.
For Ultraviolet tester, Outdoor ultraviolet detector, Germicidal lamp. Features
output voltage change with ambient ultraviolet intensity increase and onboard amplifier circuit
with adjustable amplification factor and analog output signal.
Response spectrum: 200nm-370nm, Dimension: 22.0mm * 16.0mm and Voltage: 3.3V ~ 5.0V.
Liquid Level Sensor
For water level alarm, output voltage increases with immersion depth using analog output. Detection depth: 48mm,
Power: 2.0V ~ 5.0V, Dimensions: 19.0mm * 63.0mm.
For sorting by colour, ambient light sensing and calibration, test strip reading or colour matching.
Features Sensor Chip: TCS3200 (RGB color detector) which detects static colour, the output is a square wave with
frequency directly proportional to incident light intensity. Also supports onboard LEDs.
2 Pins select the output frequency scaling factor, 2 pins select the color filter of red, green, blue.
OUT pin outputs a square wave with frequency proportional to the selected color intensity.
The detected color can be determined by the ratio of the intensity of red, green and blue.
Voltage: 2.7V ~ 5.5V, Ideal detection distance: 10mm, Dimension: 36.0mm * 20.6mm.
demo codes, schematic, datasheets, etc. in new window
Arduino Sensor Pack