We think we have got it right and all our products have been designed to give you the maximum flexibility
while remaining easy to use. All our programmers now have USB interfaces and are listed below.
Our low cost AVRISP-U
programmer is ideal for entry level programming and
includes all the features you need, including code buffers, automatic device detection and ISP speed setting,
serial numbers, calibration bytes, fuses and Auto-programming functions. It can run from AVRStudio or from its own software.
If you need more features, then our AVRUSB
programmer also includes a DLL and command line for integration
into your own software or test equipment (ATE). It supports JTAG programming as well as AVRISP and a JTAG adapter is included.
It also supports most obsolete AT90S microcontrollers and one PC can run up to 8 of them. Examples are included for VB, C++ and Delphi.
Kanda also supply a version of AVR ICE
that includes all the leads and cables needed to connect it
to STK200, STK300 or STK500 boards or your own circuit using JTAG, ISP or DebugWire. It is also available with our AVR boards.
Atmel have stopped making AVR ISP MKII (ATAVRISP2)
so they can sell much more expensive ICE products but
Kanda supply a version that has all the same features, works seemlessly from Atmel Studio, uses the built-in Studio firmware
updater and has both 6 and 10-way target interfaces - and it is very competively priced.
If you want a standalone, portable and battery powered simple programmer, we have a choice of low cost keyfob
programmers and the more
AVR ISP programmer. Both are loaded from the PC using simple software and USB
interface. Once loaded, they are completely portable, battery operated and the handheld programmer can
also power your target circuit, if required. They both support AVR UPDI interface and handheld also supports JTAG, TPD and UPDI.
Some of our popular AVR ISP products are listed here.
AVR ICE PCBA with Adapters
ATATMEL-ICE-PCBA AVR ICE Debugger with Adapters included
It has all the function of expensive boxed versions but is much cheaper. and Kanda have included an adapter board with this version to convert to 6 and 10-way ISP and 10-way JTAG..
AVR ISP MKII Programmer (ISP, Xmega, TDI)
AVRISP MKII Programmer
Low cost programmer for programming all ATtiny, ATmega and ATXmega microcontrollers using in system programming from Studio development environment...
USB AVR ISP In System Programmer
Low cost USB port AVR ISP
The low cost AVRISP-U has its own software or can be run from Studio. It can power target and now has stronger drive to program difficult ISP circuits...
USB AVR Programmer with JTAG
USB AVR Programmer with JTAG
In System Programmer with ISP and JTAG interfaces. Packed with extra features for ATtiny, AT90S and ATmega AVR microcontrollers. Includes command line and DLL software...
AVR and ATxmega Handheld V3
AVR and XMEGA Handheld Programmer
Version 3 AVR standalone Handheld Programmer with single button operation, supports all programming interfaces and AVR D series microcontrollers...
8-way AVR V3 Handheld
8-way Handheld Programmer Benefits
This 8-way standalone programmer makes it simple to update firmware in ATxmega, AVR D Series and AVR microcontrollers. Select slot needed with a rotary switch, then you plug it in...
256KB AVR Keyfob
256KB Individual Keyfob Mini-programmer for AVR - USB
Supports ISP and UPDI
A completely portable programmer for In System Programming of AVR flash microcontrollers, for field and production use with 256KB of memory. This programmer
Kanda also supplies AVR training kits that introduce microcontroller basics and how to program
AVR microcontrollers in assembly lanuage and C. They include either the simple AVRISP-U programmer or the AVR ICE
debugger and programmer and emulator.
AVR Development and Training Kits
We can ship our AVR ISP kits anywhere in the world, and accept payment by Paypal or
credit card using our secure online payment gateway. You can also request a
proforma invoice on our shop if you would rather pay by bank transfer.