USB Dongle3 for Handheld Programmer
USB Interface for Handheld Programmers
USB PC interface for all Handheld Programmers, Portable Programmer and AVR Keyfob programmers(Dongle3).
Order Code
DONGLE3
Price: $30.00
JTAG Adapter for AVR Handheld Programmer
JTAG Adapter for AVR Handheld Programmer
This adapter lets you use the JTAG programming algorithm with the Kanda AVR or AVR/ATxmega USB Handheld programmer, with software version v1.2.5 on.
Order Code
AVRHHP-JTAG
Price: $12.00
0.5 Metre 10-way ISP lead
0.5 Metre 10-way ISP lead
0.5 metre (19 inches) ISP lead with 10-way (5 x 2) connector on each end. Replacement for 10-way lead supplied with all Kanda ISP and handheld programmers.
Order Code
CR10W0-5M
Price: $8.50
UPDI 12V Adapter
ATtiny 12V UPDI Adapter
UPDI interface is supported on V3 version of Handheld Programmer only and AVRUPDI Programmer
Adapter to supply 12V pulse for ATtiny UPDI programming...
Order Code
UPDI-12V
Price: $10.00
OTG Cable Type C
USB OTG Cable Type C
This cable provides a USB Host that lets you connect your Android phone to Kanda USB Dongle. This allows you to load your Kanda Handheld programmer from your Android phone.
Order Code
OTG-C
Price: $4.50
OTG Cable Micro B
USB OTG Cable Type Micro B
This cable provides a USB Host that lets you connect your Android phone to Kanda USB Dongle. This allows you to load your Kanda Handheld programmer from your Android phone.
Order Code
OTG-MICRO-B
Price: $4.50
6-way ISP for ASIC 21225
10 to 6-way AVR ISP Reversed
An adapter or converter from the standard Kanda 10-way handheld programmer output to a 3 x 2, 0.1inch (2.54mm) format, for AVR ISP.
For ASIC-21225 charger and rear of PCB...
Order Code
10AVR6-R
Price: $15.00
6-way AVR ISP Adapter
10 to 6-way AVR ISP with crimp housing
An adapter or converter from the standard Kanda 10-way handheld programmer output to a 3 x 2, 0.1inch (2.54mm) format, for AVR ISP...
Order Code
10AVR6
Price: $15.00
PIC 10-way to 6 Flying lead adapter
PIC 10-Way to 6 Flying lead Adapter
This version is for Kanda PIC programmers and there is a different version for AVR and EEPROM.
An adapter for standard Kanda 10-way programmer output to a 6 by 1-way format. The 6 flying...
Order Code
10FLEX6
Price: $13.33
AVR 10-way to 6 Flying lead adapter
AVR 10-Way to 6 Flying lead Adapter
This product is setup for AVR microcontrollers and Serial EEPROMs and there is a different version for PIC microcontrollers.
An adapter for standard Kanda 10-way programmer output to a 6...
Order Code
10FLEX6-A
Price: $15.00
10-way to 6-way Micromatch adapter
10-Way to 6-Way Micromatch Adapter
An adapter or convertor from standard Kanda 10-way programmer output to a 6-way Micromatch format for AVR ISP. The ...
Order Code
10MICR6
Price: $13.00
10-way to 6-way DIL Adapter
10-Way to 6-Way DIL Programmer Adapter
An adapter or convertor from standard Kanda 10-way programmer output to a AVR ISP 6-way DIL programming format. The 6-Way header is ...
Order Code
10DIL6
Price: $13.00
8-Way Programmer Switch
Replacement Switch Stem for Kanda 8-Way Handheld Programmer
The 8-way switch on Kanda 8-way programmers has a separate stem. This can be lost occasionally. This is the replacement stem that plugs into the switch on the PCB, not the whole
Order Code
TW-8S
Price: $1.00
ARM Cortex Header 2.0mm
ARM Cortex M0 SWD Header, 2 mm pitch
Adapter to convert SAM D handheld programmer output to Cortex M0 SWD Debug header layout. This adapter is 2 mm pitch...
Order Code
10SWD2-0
Price: $16.00
6-way PDI Adapter
10-Way to 6-way PDI Adapter
An adapter or converter from the standard Kanda 10-way handheld programmer output to a 3 x 2 format for ATxmega PDI targets.
The pins available are VCC, GND plus PDI-CLOCK and PDI-DATA, using Atmel...
Order Code
10PDI6
Price: $15.00
SWD Adapter 1.27mm
ARM Cortex M0 SWD Header, 0.05 inch or 1.27mm pitch
ARM Cortex M0 SWD Header, 0.05 inch or 1.27mm pitch Adapter to convert SAM D handheld programmer output to Cortex M0 SWD header. This adapter is 1.27mm or 0.05 inch pitch...
Order Code
10SWD1-27
Price: $17.00
SWD Adapter 2.54mm
ARM Cortex M0 SWD Header, 0.1 inch or 2.54mm pitch
Adapter to convert SAM D handheld programmer output to Cortex M0 SWD header. This adapter is 2.54mm or 0.1 inch pitch...
Order Code
10SWD2-54
Price: $10.00
AVR ISP 1.27mm
Atmel AVR ISP 1.27mm adapter
Adapter to convert standard 2.54mm (0.1") AVR ISP output to 1.27mm (0.05") pitch. This adapter uses standard 10-way ISP target layout.
Order Code
10ISP1-27
Price: $17.00
AVR ISP 2.0mm Adapter
AVR ISP 2.0mm Adapter
Adapter to convert standard 10-way Atmel AVR ISP from 2.54mm (0.1") pitch to 2.0mm pitch.
Order Code
10ISP2-0
Price: $17.00
AVR JTAG Adapter 2.0mm
AVR JTAG Adapter - 2.0mm
Adapter to convert normal 10-way Atmel AVR JTAG connector to 2.0mm pitch. Fits AVR USB programmer and AVR keyfob and handheld programmers.
Order Code
10JTAG2-0
Price: $17.00
Batteries for Handheld Programmer
Handheld Programmer Batteries
Pack of 2 9V PP3 batteries for AVR, PIC and Serial EEPROM handheld programmers...
Order Code
BAT-HHP
Price: $6.50
AVR JTAG 1.27mm Adapter
Atmel AVR JTAG Adapter 1.27mm
Adapter to convert normal 10-way Atmel AVR JTAG connector to 1.27mm (0.05") pitch. Fits AVR USB programmer and AVR keyfob and handheld programmers.
Order Code
10JTAG1-27
Price: $17.00
Customer Connectors, adapters and add-ons
Customer Connectors, Adapters and Add-ons
QUSB2SK with No QUSB2 Module fitted
Main board with FPGA but no QUSB2 module.
Order Code
CUSTOM
Price: $396.00