Wellon GP-10 Standalone Universal Programmer

GP-10 USB Universal Standalone Programmer

This 48-pin USB Universal Standalone Programmer is for a range of devices, including PIC microcontrollers, EEPROMs, dsPIC, AVR and other microcontrollers like AT89, plus PLDs and flash memory.
The GP-10 USB Universal Standalone Programmer has PC connection and standalone mode - once the USB Universal Standalone Programmer is loaded, just insert the device and program using button.
The USB Universal Standalone Programmer is very fast because it has USB 2.0 interface for Hi-speed data transfer.

The full device support can be seen here, in new window.

Device support in Standalone mode is smaller and can be seen here.

Other Universal Programmers in the range also support Microchip devices or just memory.
See Wellon Programmer Range for an overview of all Wellon universal programmers.

USB Standalone Universal Programmer Features

• USB 2.0 for much faster programming
• Standalone Mode with Go button
• Dimension:160*180*32mm,weight:425g.
• 48 Pin ZIF socket with universal pin-drivers.
• USB Interface so USB Universal Standalone Programmer can be used with LAPTOPS, PC, PS/2 or compatibles
• The USB Universal Standalone Programmer accepts most compiler outputs in JEDEC format including ABEL, CUPL, PALASM, TANGO PLD, OrCAD PLD, PLD Designer and ISDATA
• Manages 16 and 32-bit word split (Set Programming)
• Features Test Vector capability and multiarray fuse map editor
• Test TTL/CMOS logic ICs and Dynamic/Static Random Access Memory devices
• Optimum programming for each individual device
• Auto identifies TTL/CMOS logic IC
• Automaticly identifies the manufacturer and type of E(E)PROMs
• Support 1.5v Low voltage devices
• Device insertion and poor-pin-contact check
• Adapters are not needed for DIL devices
• Universal DIP, PLCC, QFP, TSOP, PSOP, SOIC, SSOP, SDIP adapters available
• Mass Production mode starts programming automatically on detection of chip insertion
• Super programming speed.
• USB Universal Standalone Programmer supports WindowsXP/2000/Vista/Windows 7 (32 and 64-bit)

Software Features - USB Universal Standalone Programmer

The software for the USB Universal Standalone Programmer is very comprehensive, with lots of features that make it ideal for both production and development.

• SELECT device includes package information, adapter type, part number description etc.
• LOAD file supports checksums, comprehensive file formats and address location
• Flexible Verify options, including VCC+/-10%
• Blank check, Erase, Program, verify, Auto Program, buffer edit and much more
• Serial numbers and statistics

The USB Universal Standalone Programmer software can be downloaded here - 25MB Download Program

Device support and Socket Converters - USB Universal Standalone Programmer

PROM: N/CMOS E(E)PROM, SeriesE(E)PROM, and FLASH Memory
PLD: CPLD, EPLD, GAL,PEEL,PALCE and more
Microcontroller: Atmel, Intel, Microchip, Signetics, Zilog, etc.
IC TEST:
TTL (74 series), CMOS (40/45 series) Logic IC DRAM (4164, 41464 ...), SRAM (2114, 6116 ...) memory device

The full device support can be seen here. The device support list includes information for socket adapters required for different packages.

Device support in Standalone mode is smaller and can be seen here.

Adapter list

Standalone Mode

The GP-10 can be used as a normal universal programmer connected to PC or in standalone mode. In this mode, you load the USB Universal Standalone Programmer from PC and then just press Go button on USB Universal Standalone Programmer to carry out programming operations.

Standalone mode can be set to convential mode where you press the GO button to program the next device or into Mass Production mode. In this mode, once GO button is pressed once, inserting a new chip will automatically start the program cycle.