My Basket:

Your basket is currently empty.


Click to view the full basket.
cosmetic navigation top arrowview the basket
cosmetic side spacer

Kanda Support Information and Software Downloads

Welcome to the support section. You can search by product or category. You can also access this section from the product page for which you are looking for support. The link to the specific content for that product can be found at the bottom of the product page.




cosmetic side space two cosmetic side spacer four
Software Downloads

Current software versions for all our products are available on our downloads page. You do not need to register for software downloads.

Visit Software Downloads Page



    Search For Product Support

    All items/categories which have support items are listed in the drop down boxes below.
    Select which one you wish to view and then click on 'view support'.
cosmetic side space two cosmetic side spacer four


Search By Product




cosmetic side space three cosmetic side spacer four


Search By Category







cosmetic side space two cosmetic side spacer four
Datasheets

Below is a list of products with datasheets available. To download, select the product from the drop down menu and click 'download'.






cosmetic side space two cosmetic side spacer four
AVR C Code Examples

Here are some code examples for AVR C, developed primarily for STK200 and STK300 kits.



cosmetic side space twocosmetic side spacer fourFAQs

Below is a list of questions. To see the answer, click on 'view answer'.

Question:
AVR USB Programmer gives error "MOSI line shorted to VCC".
Question:
AVR USB Programmers give FTDI DLL error. Why?
Question:
AVRISP-U AVR USB Programmer gives Device Not Responding error. Why?
Question:
Can I add the AVRISP-U programmer that comes with STK200 kit to AVRStudio 5?
Question:
Do Sena Terminal Servers have Surge protection?
Question:
Half of PORTC C on my STK200 board will not work. Why?
Question:
How do I get my serial port programmer to work in 64-bit Windows?
Question:
How do I program Boot Block and application code to my AVR microcontroller?
Question:
How do I use UART or serial port code on my STK200 board?
Question:
How to program bootloader with AVR programmer?
Question:
I am having trouble updating programmer in Windows 7
Question:
I am trying a simple C project and it will not do anything on the STK300 board. Why?
Question:
I can connect to my AVR circuit with AVRISP, but PSI-ISP or AVRUSB or AVRISP-U cannot find the target device. What is the problem?
Question:
I have a Handheld Programmer and a Keyfob Programmer. I am experiencing problems connecting to PC with Windows XP, and with updating the programmer code.
Question:
I have an STK200, and I do not know which socket to use for a ATmega164.
Question:
I have downloaded the latest AVRUSB software (v2.1. 4 on) and I get FTDIXX2.DLL error. What is the problem?
Question:
I have made a 10 to 6-way adapter for a handheld programmer and it does not work.
Question:
I have problems with my AVR JTAG ICE MKII as AVRStudio won't recognise it.
Question:
I have set Clock Fuses to External Clock on my device and the programmer cannot find it with STK200 board
Question:
I only have a serial port on my laptop and PSI-ISP and EEISP hangs when I first connect it.
Question:
I programmed my Mega128 and now it will not connect to my programmer.
Question:
I want to use the mounted ATmega128 adapter (KANMEGDEV) on my own board. Do you have any layout information?
Question:
Is there a method of reloading a project into Kanda programmers from the command line?
Question:
My AVR is running very slowly, and UART transmission gives strange characters. Why?
Question:
My AVR JTAGICE emulator is not operating correctly after I changed version of AVRStudio. What do I do?
Question:
My JTAGAVR-IICN has stopped working, and AVRStudio will not find it. What do I do?
Question:
My parallel port programmer is giving program and verify errors. I am using Windows XP.
Question:
My PIC16F628A fails to connect, why?
Question:
My USB JTAGAVR Emulator fails firmware upgrade with the latest version of AVR Studio. I get the message 'No supported board found'
Question:
Programmer is not detected on Parallel (Printer) port
Question:
The PIC Handheld programmer will not work with my circuit. Are there any special circuit requirements?
Question:
The ribbon cable on my programmer is not wired with pin 1 as the red stripe. It seems to be crossed. Is this a faulty lead?
Question:
What are Bluetooth Profiles?
Question:
What are the default Jumper settings for ST7 Starter kit
Question:
What do the error codes mean on the PIC Handheld Programmer?
Question:
What is the correct Clock setting for STK200?
Question:
What is the low voltage support on different AVR programmers?
Question:
What Windows Operating Systems are supported by Kanda programmers?
Question:
When I compile a C Project in AVRStudio, I can't find the output file for the programmer. Where is it?
Question:
When using ST7Starter kit, I receive the error message "No response from Device - Running Simulation" or "Unable to comunicate with Device"
Question:
Where can I get older versions of AVRStudio as my PC is too slow for AVStudio6!
Question:
Why isn't my JTAGICE recognised by AVRStudio 5?





cosmetic side space two cosmetic side spacer four
Useful External Links

Cornell University are very strong on AVR microcontrollers, and these projects and course notes will be very useful to someone starting with microcontrollers.