USB COP8 ISP Programmer

COP8 USB Programmer ISP

COP8 ISP Main Features

• Programmer powered by USB bus
• Conforms to USB power requirements, including sleep
• Supports USB v1.1 protocol and USB v2.0 compatible
• Direct USB drivers not Virtual Serial Port
• Supports Win 98SE/2000/XP/ME/XP/Vista 32-bit only
  ** Win 95 and early Win98 should work with Microsoft USB update
  ** NT4 is NOT supported, as Microsoft have not updated kernal support and no driver support is available
• Programs target devices from 1.8V to 5V
• Multiple programmers from one PC
• Uses standard 10-way target interface
• Automatic program start on insertion

COP8 ISP Software Features

• Simple install and detection of each programmer
• Multiple programmers can be operated from a single PC screen or multiple screens
• Full Options and Security support on user friendly screen
• Colour coded Flash buffer can be edited in Hex and ASCII
• User defined serial numbering in Flash memory
• Comprehensive Check Sum support CR16/32, XOR 16/32
• Flexible Auto-program options
• Pop-up Reset on Error feature prevents errors being ignored - can be disabled
• Plug and Program mode - programmer starts automatically when new target is detected, if this mode is set
• Full verify or only Verify pages with data for extra speed

Contents

• COP8 Programmer unit - 66 x 66 x 28mm (2.6 x 2.6 x 1.1 inches)
• 1.8m USB A (PC or Hub) to USB B (Programmer) cable
• 1m programming lead with 10-way target interface and built-in 2*Vcc generator
• Software CD
• Supplied in video case

COP8 microcontroller Device Support

• 8K Devices
• COP8AME9
• COP8ANE9
• 32K Devices
• COP8CBR9
• COP8CCR9
• COP8CDR9
• COP8SBR9
• COP8SCR9
• COP8SDR9
• COP8CBE9
• COP8CCE9
• COP8CDE9
• COP8SBE9
• COP8SCE9
• COP8SDE9
• COP8CFE9
  8K and 32K devices use 2*Vcc generator lead supplied