Handheld PIC Programmer USB Starter Kit
USB Starter kit for Hand Held PIC Programmer
Replaced by New version - PIC-HH0110
Please Purchase new version
Shipping to United States
Recorded Airmail: $15.00
Fedex Express: $29.00
Order Code
PIC-HH0010U
Price: $119.00
In Stock
Related Products
Product Details | |
USB Starter kit for Handheld PIC Programmer
Replaced by New version - PIC-HH0110
Please Purchase new version
Handheld PIC Programmer with USB PC interface and software. Load the Handheld PIC Programmer from a PC using the USB PC interface and the simple Wizard Software and then you do not need PC again. The Hand Held PIC Programmer is completely portable and you just plug it into your PIC target boards and program/verify Code and/or Data with a single button press. Supports PIC16F and PIC18F microcontrollers, and powers target circuit. Has 256KB memory.
Now supports PIC18FxxJxx and PIC18FxxKxx PIC microcontroller families.
The PC interface is USB port.
Software Features
- Supports Windows 2000/XP/VISTA/7/8
- Simple software
- Loads Flash, EEPROM, Configuration words and User ID from HEX file
- Select Low or High Voltage programming
- Select for Device ID match, configuration word verify, EEPROM Data save and other features
- click finish to load your PIC programmer
Starter Kit contents
Hand Held PIC Programmer
PC Interface (USB) for loading code and settings
Ribbon cables with 10-way connector
6-way Flying lead adapter
Software CD
Supplied in case
Handheld PIC Programmer Features
- Hand-held PIC Programmer uses 9V PP3 battery or power supply
- Single button operation
- Load it once, program targets for ever
- Reload new programs as often as you need
- Holds program code indefinitely
- Low or High Voltage programming
- 10-way DIL and 6 x 1-way flying lead connectors included
- Program/Verify Flash or EEPROM or both
- Program and verify Configuration Bytes and User ID
- Existing EEPROM Data can be preserved
- Powers target device (up to 150mA) at 5V regardless of target voltage (so that Bulk Erase command always works)
- Dimensions: Metric- 106mm x 58mm x 25mm
- Dimensions: Imperial - 4.5 x 2.5 x 1 inches
- 256KB memory
PIC Microcontroller Support
All released PIC18F microcontrollers including PIC18FxJx. Updates available for new device support.
PIC16F Microcontrollers
- PIC16F627
- PIC16F628
- PIC16F627A, PIC16F628A, PIC16F648A (HVP mode programming only if Reset pin is not reprogrammed as I/O)
- PIC16F631, PIC16F636, PIC16F639
- PIC16F677
- PIC16F68x, PIC16F690
- PIC16F7x
- PIC16F7x7
- PIC16F785
- PIC16F818
- PIC16F819
- PIC16F8x
- PIC16F8xA
- PIC16F87x
- PIC16F873A
- PIC16F874A
- PIC16F876A
- PIC16F877A
- PIC16F88x
- PIC16F91x
Note: Not all devices have LVP mode
Not supported
- PIC16F630
- PIC16F676
- PIC16F716 - will be supported
- PIC16F5x - will be supported
- PIC16F505
Extra Hand Held PIC Programmers You only need one starter kit for as many Handheld PIC programmers as you require
If you do not want to use the internal 9V PP3 battery, the power supply required is 9V with a 2.5mm Barrel connector. These are available on the shop.
9V International Power supply for use with this PIC handheld programmer.
A Quick start guide with recommended circuits and setup details can be downloaded here or you can View PIC Programmer ICSP Guide in new window..
For an overview of our PIC Programmer range, please see PIC Programmer Overview in new window
Ordering Information
Ordering Information |
Order Code: PIC-HH0010U |
Price: $119.00 |
Shipping to United States: | Recorded airmail - $15.00 | Fedex Express - $29.00 |