Selected Product: Programmers-Burners/Hand Held Programmers/PIC Handheld Programmers/PIC-HH0820
USB 8-Way PIC Handheld Programmer Order Code: PIC-HH0820 Price: £151.24
USB 8-Way Hand Held PIC Programmer for PIC Microcontrollers
Really simple PIC handheld programmer, ideal for field firmware updates or production PIC microcontroller programming, that stores up to 8 different programs and PIC microcontroller configurations. Select the program needed with the 8-way rotary switch and press the button. Eliminates the need to have a PC or laptop on the job and prevents mistakes. A superb tool for production or field engineers.
This product is just the handheld programmer without PC loader
You need one PIC 8-Way Handheld Programmer Starter Kit to load as many programmers as you like from the PC. Once the programmer is loaded it is completely portable.
You need one PIC 8-Way Handheld Programmer Starter Kit to load as many programmers as you like from the PC. Once the programmer is loaded it is completely portable.
8-way Handheld PIC Programmer Features
- 8-wayHand-held PIC Programmer uses 9V PP3 battery or power supply
- Select which program to use with 8 position rotary switch
- Single button press for PIC target programming
- Load it once, program targets for ever
- Reload new programs as often as you want
- Holds up to 8 programs indefinitely
- Low or High Voltage programming modes
- 10-way DIL and 6 x 1-way flying lead adapters included
- Program and Verify Flash or EEPROM or both
- Program and Verify Configuration bytes
- EEPROM data in target PIC can be preserved
- Boot block on larger PIC18FxxK devices can be preserved
- Target can be powered or unpowered
- Powers target (up to 150mA) at 3.3V or 5V depending on PIC device and user selection.
- Dimensions: Metric- 106mm x 58mm x 25mm
- Dimensions: Imperial - 4.5 x 2.5 x 1 inches
- 2MB on-board memory
- New version with SIL adapter not 6-way Flying Lead
Windows OS
Win2000, XP, Vista, Win7, Win8, Win10, Win11 - 32 and 64-bit versions
PIC Microcontroller Support
PIC18F microcontrollers
- PIC18Fxxxx
- PIC18FxxJxx
- PIC18FxxKxx (9V VPP)
- Now Supports PIC18FxxK80, PIC18F6xK22/8xK22, PIC18FxxJ50, PIC18F6xK90/8xK90 and PIC18FxxK83
- Supports PIC18FxxQ10, PIC18FxxQ4x, PIC18FxxQ71
- PIC18FxxQ20, PIC18FxxQ83, PIC18FxxQ84
- Supports LF versions
PIC12F Microcontrollers
- PIC12F1822, PIC12F1840
- PIC12F609, PIC12F615, PIC12F617
- PIC12F635, PIC12F683
- PIC12F1571, PIC12F1572
PIC16F Microcontrollers
- PIC16F610
- PIC16F616
- PIC16F627
- PIC16F628
- PIC16F627A, PIC16F628A, PIC16F648A (HVP mode programming only if Reset pin is not reprogrammed as I/O)
- PIC16F631, PIC16F636, PIC16F639
- PIC16F677
- PIC16F68x, PIC16F690
- PIC16F7x
- PIC16F7x7
- PIC16F72x
- PIC16F785
- PIC16F818
- PIC16F819
- PIC16F8x
- PIC16F8xA
- PIC16F87x
- PIC16F873A
- PIC16F874A
- PIC16F876A
- PIC16F877A
- PIC16F88x
- PIC16F91x
- PIC16F15xx
- PIC16F161x
- PIC16F170x
- PIC16F171x
- PIC16F176x
- PIC16F177x
- PIC16F178x
- PIC16F18xx
- PIC16F183xx
- PIC16F19xx
- PIC16F188xx
- PIC16F153xx
- PIC16F184xx
- PIC16F152xx
- PIC16F180xx
- PIC16F181xx
- LF versions are also supported
- PIC12F629
- PIC16F630
- PIC16F676
- PIC16F5x
- PIC16F505
Important
This product is just the programmer
You will need a Starter Kit to load this 8-way PIC Handheld Programmer. One Starter Kit will allow you to load as many 8-way Hand Held PIC Programmers as you want. The Starter kit includes a programmer and is on Special Offer.
8-way Handheld PIC Programmer USB Starter Kit
Contents
- 8-way Handheld standalone programmer
- 10-way ribbon cable
- 6-way SIL Adapter (MCLR, VCC, GND, PGD, PGC, PGM)
If you need different pin-out, see 10FLEX6 in accessories below
If you do not want to use the internal 9V PP3 battery, the power supply required is 9V with a 2.1mm barrel connector (center positive). These are available here or any power supply that fits the requirements can be used..
9V International Power supply for use with this PIC programmer.
PIC Programmer Range
For an overview of our PIC Programmer range, please see PIC Programmer Overview in new window.
We can supply custom ICSP connectors to match your PCB header. Please see Custom ISP Connectors
There is also a version of the 8-way PIC handheld programmer with an ATE (Automated Test Equipment) interface, PIC ATE Programmer
datasheet
This opens in a new window.
Product Accessories and Related Products
The USB 8-Way PIC Handheld Programmer is RoHS compliant like all our programmers, development boards and embedded modules.
Kanda products comply with all FCC and EU legislation
Kand has an environmental policy and all our products are manufactured with concern for the environment
