Search Site
Call +44 (0)1974 261273
Selected Manufacturer: PEMicro
Below are the products which we stock from PEMicro.
Cyclone FX Universal
Cyclone FX Universal Programmer
The Cyclone FX is PEmicro's most advanced in-circuit, stand-alone flash programmer which will in-circuit program, debug, and test MCU devices either in a stand-alone mode or controlled from a PC...
The Cyclone FX is PEmicro's most advanced in-circuit, stand-alone flash programmer which will in-circuit program, debug, and test MCU devices either in a stand-alone mode or controlled from a PC...
Order Code
CYCLONE-FX-UNIV
CYCLONE-FX-UNIV
Price: $1,199.00
Cyclone LC Universal
Cyclone LC Universal Programmer
PEmicro's Cyclone LC flash programmers are powerful tools to in-circuit program, debug, and test MCU devices in either stand-alone mode or controlled from a PC...
PEmicro's Cyclone LC flash programmers are powerful tools to in-circuit program, debug, and test MCU devices in either stand-alone mode or controlled from a PC...
Order Code
CYCLONE-LC-UNIV
CYCLONE-LC-UNIV
Price: $799.00
Cyclone LC ARM
Cyclone LC ARM Programmer
PEmicro's Cyclone LC ARM flash programmers are powerful tools to in-circuit program, debug, and test ARM devices in either stand-alone mode or controlled from a PC.
PEmicro's Cyclone LC ARM flash programmers are powerful tools to in-circuit program, debug, and test ARM devices in either stand-alone mode or controlled from a PC.
Order Code
CYCLONE-LC-ARM
CYCLONE-LC-ARM
Price: $599.00
Multilink Debug Probe
PE Micro Multilink Debug Probe
PEmicro’s Multilink is a debug probe which allows a PC access to the Background Debug Mode (BDM) or JTAG interface on wide range of ARM Cortex and NXP/STmicroelectronics processor families.
PEmicro’s Multilink is a debug probe which allows a PC access to the Background Debug Mode (BDM) or JTAG interface on wide range of ARM Cortex and NXP/STmicroelectronics processor families.
Order Code
USB-ML-UNIVERSAL
USB-ML-UNIVERSAL
Price: $199.00
MULTILINK High Speed
PEmicro’s USB Multilink Universal FX
High-speed, all-in-one development interface which allows a PC access to the Background Debug Mode (BDM) or JTAG interface on NXP & STM MCU and ARM devices...
High-speed, all-in-one development interface which allows a PC access to the Background Debug Mode (BDM) or JTAG interface on NXP & STM MCU and ARM devices...
Order Code
USB-ML-UNIV-FX
USB-ML-UNIV-FX
Price: $399.00
Multilink ACP
PEmicro’s Multilink ACP
It is a debug probe which allows a PC access to the Background Debug Mode (BDM) or JTAG interface on wide range of ARM Cortex devices. It connects between a USB port on a Windows machine and the standard debug co
It is a debug probe which allows a PC access to the Background Debug Mode (BDM) or JTAG interface on wide range of ARM Cortex devices. It connects between a USB port on a Windows machine and the standard debug co
Order Code
USB-ML-ACP
USB-ML-ACP
Price: $149.00
Renesas Adapter
Renesas Adapter for Cyclone FX Universal Programmer
The Renesas Adapter for Cyclone FX Universal allows the user to program supported Renesas devices using the Cyclone Universal FX programmer.
The Renesas Adapter for Cyclone FX Universal allows the user to program supported Renesas devices using the Cyclone Universal FX programmer.
Order Code
CUFX-RENESAS-ADPT
CUFX-RENESAS-ADPT
Price: $99.00
ST8 Adapter
ST8 Adapter for Cyclone Programmers
Adapter for Cyclone LC Universal and Cyclone FX Universal standalone programmers. This optional adapter converts from a standard 6-pin target header to a 4-pin ERNI connector...
Adapter for Cyclone LC Universal and Cyclone FX Universal standalone programmers. This optional adapter converts from a standard 6-pin target header to a 4-pin ERNI connector...
Order Code
CU-CUFX-STM8-ADPT
CU-CUFX-STM8-ADPT
Price: $99.00
ARM Programming Software
PEmicro's PROG for ARM® Cortex Processors flash programmer software
allows you to program/reprogram external flash devices from many ARM device manufacturers in-circuit, via one of PEmicro's compatible hardware debug interfaces.
allows you to program/reprogram external flash devices from many ARM device manufacturers in-circuit, via one of PEmicro's compatible hardware debug interfaces.
Order Code
PE-PROGACMP
PE-PROGACMP
Price: $199.00
68HC08 Command-Line
68HC08 Command-Line Programming Software
CPROG08SZ is a command line version of the PROG08SZ software which programs EEPROM, EPROM, Flash, etc., on a 68HC08 based target. It uses script files to automate the programming process, making
Order Code
CPROG08SZ
CPROG08SZ
Price: $129.00
68HC(S)12(X) Software
68HC(S)12(X) Flash/EEPROM Programmer Software
PEmicro's PROG12Z Flash Programmer software allows you to program/reprogram both internal and external HC12 or MC9(S)12(X) flash devices in-circuit.
PEmicro's PROG12Z Flash Programmer software allows you to program/reprogram both internal and external HC12 or MC9(S)12(X) flash devices in-circuit.
Order Code
PROG-HL-12Z
PROG-HL-12Z
Price: $199.00
68HC16 Software
68HC16 Flash/EEPROM Programmer Software
PEmicro PROG16Z programming software allows you to program/reprogram both internal and external flash devices in-circuit, via PEmicro's Multilink FX interface cable (sold separately).
PEmicro PROG16Z programming software allows you to program/reprogram both internal and external flash devices in-circuit, via PEmicro's Multilink FX interface cable (sold separately).
Order Code
PROG-HL-16Z
PROG-HL-16Z
Price: $199.00
CPU3xx Software
CPU3xx Flash/EEPROM Programmer Software
PEmicro CPU3xx programming software allows you to program/reprogram both internal and external flash devices in-circuit...
PEmicro CPU3xx programming software allows you to program/reprogram both internal and external flash devices in-circuit...
Order Code
PROG-HL-32Z
PROG-HL-32Z
Price: $199.00
ColdFire V1 Software
ColdFire V1 Flash/EEPROM Programmer Software
PEmicro's PROGCFV1 Flash Programmer software allows you to program/reprogram external flash devices in-circuit...
Order Code
PROG-HL-CFV1
PROG-HL-CFV1
Price: $199.00
ColdFire ISP Software
ColdFire Flash/EEPROM Programmer Software
PEmicro's PROGCFZ software allows the user to program/reprogram external flash devices in-circuit via PEmicro's BDM interface Hardware...
PEmicro's PROGCFZ software allows the user to program/reprogram external flash devices in-circuit via PEmicro's BDM interface Hardware...
Order Code
PROG-HL-CFZ
PROG-HL-CFZ
Price: $199.00
68HCS08 ISP Software
68HCS08 Flash/EEPROM Programmer Software
PEmicro's PROGHCS08 is programming software that allows the user to program/reprogram both internal and external flash devices in-circuit. A PEmicro hardware interface...
PEmicro's PROGHCS08 is programming software that allows the user to program/reprogram both internal and external flash devices in-circuit. A PEmicro hardware interface...
Order Code
PROG-HL-HCS08
PROG-HL-HCS08
Price: $199.00
ISP Software NXP SPC5
Software For NXP MPC55xx/56xx/57xx & STM SPC5
PEmicro's PROGPPCNEXUS BDM Programmer software allows you to program/reprogram both internal and external flash devices in-circuit, via PEmicro's BDM interface cable...
PEmicro's PROGPPCNEXUS BDM Programmer software allows you to program/reprogram both internal and external flash devices in-circuit, via PEmicro's BDM interface cable...
Order Code
PROG-HL-PPCNEXUS
PROG-HL-PPCNEXUS
Price: $199.00
Power Architecture 5xx/8xx ISP
Power Architecture 5xx/8xx ISP Software
PEmicro's PROGPPCZ software allows you to program/reprogram both internal and external flash devices in-circuit, via PEmicro's BDM interface cable (sold separately), on an MPC5xx/MPC8xx device with
PEmicro's PROGPPCZ software allows you to program/reprogram both internal and external flash devices in-circuit, via PEmicro's BDM interface cable (sold separately), on an MPC5xx/MPC8xx device with
Order Code
PROG-HL-PPCZ
PROG-HL-PPCZ
Price: $199.00
RS08 ISP Software
RS08 Full Featured ISP Software
PEmicro's PROGRS08 Programming Software allows you to program/reprogram flash devices in-circuit, via a six pin debug connector on the target processor system...
PEmicro's PROGRS08 Programming Software allows you to program/reprogram flash devices in-circuit, via a six pin debug connector on the target processor system...
Order Code
PROG-HL-RS08
PROG-HL-RS08
Price: $199.00
S12Z ISP Software
S12Z ISP Software
PEmicro's PROGS12ZZ software allows the user to program/reprogram internal and external flash memory on NXP 9S12Z devices. The programmer communicates to the processor...
PEmicro's PROGS12ZZ software allows the user to program/reprogram internal and external flash memory on NXP 9S12Z devices. The programmer communicates to the processor...
Order Code
PROG-HL-S12Z
PROG-HL-S12Z
Price: $199.00
HC(S)12(X) In-Circuit Debugger
HC(S)12(X) In-Circuit Debugger
PEmicro ICD12Z for Windows is a powerful tool for debugging code. It uses an HC12 or MC9(S)12(X) processor's background debug mode (BDM), via one of PEmicro's hardware interfaces, to give the user access to
PEmicro ICD12Z for Windows is a powerful tool for debugging code. It uses an HC12 or MC9(S)12(X) processor's background debug mode (BDM), via one of PEmicro's hardware interfaces, to give the user access to
Order Code
ICD12Z
ICD12Z
Price: $159.00
68HC16 In-Circuit Debugger
68HC16 In-Circuit Debugger
PEmicro's ICD16 for Windows is a powerful tool for debugging code. It uses the processor's background debug mode (BDM), via the ICD cable, to give the user access to all on-chip resources...
PEmicro's ICD16 for Windows is a powerful tool for debugging code. It uses the processor's background debug mode (BDM), via the ICD cable, to give the user access to all on-chip resources...
Order Code
ICD16Z
ICD16Z
Price: $159.00
CPU3xx In Circuit Debugger
CPU3xx In Circuit Debugger
PEmicro's ICD32 for Windows is a powerful tool for debugging code. It uses the processor's background debug mode (BDM), via the ICD cable, to give the user access to all on-chip resources...
PEmicro's ICD32 for Windows is a powerful tool for debugging code. It uses the processor's background debug mode (BDM), via the ICD cable, to give the user access to all on-chip resources...
Order Code
ICD32Z
ICD32Z
Price: $159.00
ColdFire V1 ICD
In-Circuit Debugger for ColdFire V1
PEmicro's ICDCFV1 is a powerful tool for debugging code that supports NXP's ColdFire V1 microcontrollers. The software uses the processor's background debug mode (BDM), via a hardware debug interface, t
PEmicro's ICDCFV1 is a powerful tool for debugging code that supports NXP's ColdFire V1 microcontrollers. The software uses the processor's background debug mode (BDM), via a hardware debug interface, t
Order Code
ICDCFV1
ICDCFV1
Price: $159.00
ColdFire In-Circuit Debugger
ColdFire In-Circuit Debugger
PEmicro's ICDCFZ for Windows is a powerful tool for debugging code on a ColdFire V2-V4 processor. It uses the processor's background debug mode (BDM), via the ICD cable, to give the user access to all on-chip
PEmicro's ICDCFZ for Windows is a powerful tool for debugging code on a ColdFire V2-V4 processor. It uses the processor's background debug mode (BDM), via the ICD cable, to give the user access to all on-chip
Order Code
ICDCFZ
ICDCFZ
Price: $399.00
68HCS08 In-Circuit Debugger
68HCS08 In-Circuit Debugger
PEmicro's ICDHCS08 is a powerful tool for debugging code. It uses the processor's background debug mode (BDM), via the ICD cable, to give the user access to all on-chip resources...
PEmicro's ICDHCS08 is a powerful tool for debugging code. It uses the processor's background debug mode (BDM), via the ICD cable, to give the user access to all on-chip resources...
Order Code
ICDHCS08
ICDHCS08
Price: $159.00
ICD NXP MPC5xxx STM SPC5
PEmicro's ICDPPCNEXUS for Windows is a powerful tool for debugging code on NXP MPC55xx/56xx/57xx devices or STMicroelectronics SPC5 devices...
Order Code
ICDPPCNEXUS
ICDPPCNEXUS
Price: $599.00
Power Architecture 5xx/8xx ICD
Power Architecture 5xx/8xx In-Circuit Debugger
PEmicro's ICDPPC for Windows is a powerful tool for debugging code. It uses the processor's background debug mode (BDM), via the ICD cable, to give the user access to all on-chip resources...
PEmicro's ICDPPC for Windows is a powerful tool for debugging code. It uses the processor's background debug mode (BDM), via the ICD cable, to give the user access to all on-chip resources...
Order Code
ICDPPCZ
ICDPPCZ
Price: $299.00
RS08 ICD
In-Circuit Debugger for the RS08
PEmicro's ICDRS08 is a powerful tool for debugging code. It uses the processor's background debug mode Module(BDM), via any of PEmicro's RS08 compatible interfaces...
PEmicro's ICDRS08 is a powerful tool for debugging code. It uses the processor's background debug mode Module(BDM), via any of PEmicro's RS08 compatible interfaces...
Order Code
ICDRS08
ICDRS08
Price: $159.00
S12Z In-Circuit Debugger
In-Circuit Debugger for S12Z devices
PEmicro's ICDS12ZZ software is a powerful tool for debugging code on NXP's S12Z microcontrollers. ICDS12ZZ communicates with the target device via one of PEmicro's hardware interfaces...
PEmicro's ICDS12ZZ software is a powerful tool for debugging code on NXP's S12Z microcontrollers. ICDS12ZZ communicates with the target device via one of PEmicro's hardware interfaces...
Order Code
ICDS12ZZ
ICDS12ZZ
Price: $159.00