You need to program memory devices before you can use them

We are experts when it comes to supplying electronic engineers and trainers with the right equipment. In our inventory, we have a wide collection of merchandise, which includes universal programmers. There are both Wellon and Xeltek designs available, each one capable of doing the job effectively.

Storing information on embedded systems

Within embedded systems, there is a need to store information like calibration data and program code permanently. This is so it stays available after you remove power from your system. Numerous memory devices and technologies can accomplish such a feat. Examples include EEPROMs, EPROMs, and PROMs, as well as flash memory. When you first manufacture a memory device, it is blank. So, it has to be programmed before you can use the system it is installed on.

It is true that current generation microcontrollers normally include flash memory. What’s more, they tend to have the ability to reprogram compact blocks of memory after you install their primary code. For programming ’empty’ gadgets though, you will need an external programmer.

Programmable logic contraptions

Other integrated circuits, referred to by acronyms like PAL, FPGA, and CPLD, are programmable logic contraptions. Here, the data you need to enter defines a combination logic circuit instead of software instructions. You have to program these gadgets before you can use them too. The equipment you need to do this goes by a number of names. Examples include IC programmer, EPROM burner, and device programmer. Regardless of the name though, this is hardware that transfers data into programmable ICs.

There are actually four types of device programmers. The one that is most important to us though is the universal programmers. These are able to program a multitude of devices, so they have far more uses.

Programming methods each follow a basic process. The device you are going to program is linked to the programmer. This happens either by connecting through an adapter to a board containing the gadget, or by plugging it into a socket on your programmer. After this happens, data can transfer to the device via the application of signals to your connecting pins. It uses pin-driver circuits to do this.

Device distinctions

Within this straightforward process, there are many distinctions between the devices. For one thing, there isn’t a single standard pinout for the programming pins. Furthermore, certain devices demand data through serial inputs, with some being parallel.

Gadgets also operate on differing supply voltages, and utilise separate voltages for programming. The outcome here is that every universal programmer I/O pin has to introduce voltages. They must do so in a range of 0 to 25V, with clock rates reaching 40MHz. There will be logic inputs with adaptable thresholds too.

We help people all over the world who need universal programmers

At Kanda, we supply products to customers all over the world. They can tell you that we offer a reliable and cost efficient service. There are top quality items, quick delivery, and technical support when you need it. As a result, this is the perfect place to get your hands on everything you could need to start programming or product development.

So, if you require universal programmers or other products, make sure you get in touch. We can suggest the right items for any need.

Leave a Reply