Waveshare Arduino Uno Plus
- Improved Arduino Uno
- Features 3.3 or 5V
- Better switches and USB connection
- AVR ATmega328P onboard
- Better power output
Shipping to United States
Recorded Airmail: $15.00
Fedex Express: $29.00
Order Code
W-UNO-PLUS
Price: $15.99
Discontinued
Related Products
Product Details | |
Waveshare Arduino Uno Plus Kit
Improved version of the classic Arduino Uno Board, with all the layout mistakes of the standard Uno removed but
completely compatible with the original units. Features an AVR ATmega328P microcontroller
Uno Plus Advantages
- Operating voltage 5V/3.3V not just 5V
Dual voltage level to support more shields
- Lateral Reset Switch not vertical
Lateral button is easier to use when connecting with shield
- Has Bootloader switch
The board can be configured to run program immediately when power-up by the switch
- Micro USB USB connector not USB Type B
Micro connector is more commonly used, and shields won't be blocked anymore while connecting
- Low profile DC jack not normal height
Shields won't be blocked when connected
- Power output header
- Provides 5V/3.3V power output OR common-grounding with other boards
- 800mA 3.3V power output not 150mA Max
UNO PLUS features higher driving capability
- Crystal oscillator not ceramic resonator
Crystal oscillator gives accurate clock reference
- 8 ADC channels not 6
CFG used as ADC6 by configuration, and ADC7 from the Reserved PIN
- Supports connecting prototype breadboard
Solder pads are provided for connecting prototype breadboard
- USB driver compatible with all OS
Driver never fails to install thanks to the onboard FT232
- Firmware fixing supported
Firmware can be fixed by using the onboard FT232, no extra programmer is needed
Arduino Uno Plus Main Features
- ATMEGA328P-AU
- AMS1117-3.3 : 3.3V voltage regulator
- NCP1117ST50T3G : 5V voltage regulator
- FT232RL : USB to UART convertor
- Arduino interface
- compatible with standard Arduino interface with two additional analog inputs A6 (config the CFG), A7
- solder pads provided, supports prototype breadboard
- ICSP interface
- MICRO USB connector : for uploading program OR serial port debugging
- Power output header : 3.3V OR 5V, voltage level configured by the onboard power configuration switch, used as power output OR common-grounding with other boards
- FT232 pins : for burning Bootloader into the microcontroller
- DC input : 7V ~ 12V
- Reset button
- Power indicator
- Serial port Rx/Tx indicator
- User LED
- Power configuration switch : for configuring the operating voltage
- Bootloader selection switch
- turn ON : the board will reset when power-up OR other USB devices were detected connecting to the PC
- turn OFF : the onboard program runs immediately when power-up, and the board will not reset when other USB devices were detected connecting to the PC
Arduino Uno Plus Expansion Headers
Downloads
Development resources: demo codes, schematic, datasheets, etc. in new window.
Arduino Uno Plus Design ResourcesOrdering Information
Ordering Information |
Order Code: W-UNO-PLUS |
Price: $15.99 |
Shipping to United States: | Recorded airmail - $15.00 | Fedex Express - $29.00 |