wellon programer install problem

Home Forums Kanda Forums Technical Support Forums wellon programer install problem

This topic is: not resolved

Notice: get_currentuserinfo is deprecated since version 4.5.0! Use wp_get_current_user() instead. in /home/kanda/public_html/blog/wp-includes/functions.php on line 4648
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #426
    Post count: 1

    I run win 7, 64-bit and When I plug wellon programmer into USB, after running the installation disc, windows recognises it and tries to load the USB driver.
    This doesn’t work.

    Windows claims that the driver is not properly signed (code 52).
    Any answers?

    AvatarKanda Admin
    Post count: 324

    We haven’t seen this problem with the latest Wellon 64-bit program – there are separate programs for 32 and 64-bit Windows so you need the correct one for your system. Kanda have done an installer that automatically installs the correct version to avoid this problem.

    If you do get it, you need to disable Device Signature Enforcement.
    When PC starts, press F8 key a few times to get Advanced Boot Options menu. Scroll down with arrow key to Disable Device Signature Enforcement and press Enter.

    Windows will start (this time only) without Device Signature Enforcement and you can install your Wellon programmer. A Wellon datasheet is available with more detail.

    • This reply was modified 6 years, 9 months ago by AvatarKanda Admin.
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

Microcontrollers, training, electronics and coding

Notice: ob_end_flush(): failed to send buffer of zlib output compression (0) in /home/kanda/public_html/blog/wp-includes/functions.php on line 4552