Selected Product: Chips ICs and Modules/Internet/Ethernet/Ethernet to Serial/NEMO10
Ethernet to Serial Embedded Module Order Code: NEMO10 Price: €22.50
Embedded Device Server Module
A low cost embedded device server module with serial port for building into products that require a network interface. The Nemo10 is an embedded serial to Ethernet converter or adapter in 24-pin DIL format, 45mm x 45mm with built in UART serial port. Configured via Telnet or serial port, it supports a range of protocols and TCP/IP stack. A simple to use Serial to Ethernet converter module for adding embedded Ethernet to your application.
Features
The user manual can be downloaded from this link:
Download User Manual
The schematic of the starter kit can be downloaded here
Starter Kit Schematic
The schematic includes a RJ45 connector with coil (marked Combo. It is a XF10BASE-COMBO1-2S from XFMRS Inc.) - see description here
RJ45 Combo Schematic
Specification
Hardware
Related Products
A starter kit is available for easy development with the embedded Ethernet module. The starter kit includes a NEMO10 emnbedded Ehernet module, power supply, serial lead and software on CD - see Nemo10 Starter Kit
datasheet
This opens in a new window.
A low cost embedded device server module with serial port for building into products that require a network interface. The Nemo10 is an embedded serial to Ethernet converter or adapter in 24-pin DIL format, 45mm x 45mm with built in UART serial port. Configured via Telnet or serial port, it supports a range of protocols and TCP/IP stack. A simple to use Serial to Ethernet converter module for adding embedded Ethernet to your application.
Features
- Single-chip DIL type Ethernet to serial or serial to Ethernet converter module for embedded Ethernet.
- Compact size 45mm x 45mm x 18.5mm.
- Built-in UART for serial interface, data transfer rate up to 115Kbps.
- Supports 10Base-T Ethernet interface.
- Supports ARP, IP/ICMP, TCP, Telnet, DHCP, and PPPoE.
- Reliable TCP/IP protocol stack.
- PPPoE protocol for DSL connection to broadband network.
- Configuration using Telnet or Config command via serial interface.
- Management software for configuration and administration.
- +5v Input, 0.3w low power consumption.
The user manual can be downloaded from this link:
Download User Manual
The schematic of the starter kit can be downloaded here
Starter Kit Schematic
The schematic includes a RJ45 connector with coil (marked Combo. It is a XF10BASE-COMBO1-2S from XFMRS Inc.) - see description here
RJ45 Combo Schematic
Specification
Hardware
- 80C51 8-bit microcontroller
- 32KB SRAM
- 64KB EEPROM
- 24 pin DIL form
- UART serial port
- LED
- Ethernet interface
- Power
- Built-in UART
- Serial speeds 1200bps to 115Kbps
- Flow Control: Hardware RTS/CTS
- Signals: Rx, Tx, RTS, CTS, DTR, DSR, GND
- 10 Base-T Ethernet
- Supports static and dynamic IP address
- ARP, IP/ICMP TCP
- Telnet
- DHCP client
- PPPoE
- Security: User ID & Password
- Telnet
- Serial console port
- HelloDevice Manager
- Supply voltage = 5V DC 10%
- Supply current = 60mA / 5V DC
- Operating temperature: 5C to 50C
- Storage temperature: -40C to 66C
- Dimension (LxWxH): 45 mm x 45 mm x 18.5 mm (1.8 in. x 1.8 in. x 0.7 in.)
- Weight: 20g
Related Products
A starter kit is available for easy development with the embedded Ethernet module. The starter kit includes a NEMO10 emnbedded Ehernet module, power supply, serial lead and software on CD - see Nemo10 Starter Kit
datasheet
This opens in a new window.
Product Accessories
 Ethernet to Serial Embedded Module Starter Kit |
