AVR Handheld Programmer - USB Port

USB Hand Held Programmer for AVR
Replaced by new version New USB Port Version

Please purchase New version

---

AVR HandHeld Field and Production Programmer for AVR microcontrollers with up to 256KB of code and Data memory. Just load the programmer from a PC using the USB AVR Hand Held programmer Starter Kit which is on special offer.
Now you just plug it into your target board and program/verify Flash and/or EEPROM with a single button press. It can supply power to your target device using internal battery or 9V external Power supply - 0-5V Vcc, up to 150mA with over-current trip - or can draw power from the target circuit.

This handheld AVR programmer is ideal for non-technical operatives as no mistakes can be made - just press the button and the correct code MUST be loaded.

You can set it to program the whole AVR microcontroller or just the Flash memory so EEPROM data is preserved, or you can program just the EEPROM which makes it ideal for configuration or QA data.

---

This version has firmware for USB port PC loader. If used with a parallel interface, it will ask to do a firmware upgrade. Just agree and the firmware version will be changed.

---

Features

• AVR Hand-held programmer uses 9V battery or power supply
• 256KB of program code space
• Single button operation
• Load target code with simple Wizard Software
• Load it once, program targets for ever
• Reload new programs as often as you need
• Holds program code indefinitely
• Supports all AVR Fuse and Lock bits
• Program/Verify Flash or EEPROM or both
• Supports programming from 2.7 - 5.5V, depending on target AVR Vcc
• Can power target AVR microcontroller (up to 150mA) or can draw power from target
• Error indicator with red/green LED
• Dimensions: Metric- 106mm x 58mm x 25mm
• Dimensions: Imperial - 4.5 x 2.5 x 1 inches

---

This programmer should be used with Atmel recommended ISP circuits. A guide to correct and incorrect ISP circuits can be downloaded here:
ISP Circuits - 80KB

---

AVR Microcontroller Support
Supports all Low Voltage (L, V) AVR Devices as well

• AT90S1200, AT90S2313, AT90S2323, AT90S2343, AT90S4433, AT90S4414, AT90S8535, AT90S8515
• ATmega16, ATmega161, ATmega162, ATmega163, ATmega164P, ATmega165, ATmega168, ATmega169
• ATmega32, ATmega323, ATmega324P, ATmega325, ATmega3250, ATmega329, ATmega3290
• ATmega48, ATmega88, ATmega8, ATmega8515, ATmega8535
• ATmega64, ATmega644, ATmega644P, ATmega645, ATmega6450, ATmega649, ATmega6490, ATmega640
• ATmega128, ATmega1280, ATmega1281, ATmega1284P, ATmega2560, ATmega2561
• ATtiny26, ATtiny261, ATtiny461, ATtiny861
• ATtiny13, ATtiny2313, ATtiny24, ATtiny25, ATtiny44, ATtiny45, ATtiny84, ATtiny85
• AT90CAN32, AT90CAN64, AT90CAN128, CANDIPM162, CANDIP8515, AT90PWM2/3, AT90PWM316

---

You will need a Starter Kit to load this AVR programmer. One Starter Kit will allow you to load as many Hand Held AVR Programmers as you want. The Starter kit comes complete with one AVR Hand Held Programmer and is on Special Offer.
256KB AVR Handheld Programmer Starter Kit

---

If you do not want to use the internal 9V PP3 battery, the power supply required is 9V with a 2.5mm Barrel connector. These are available on the shop.
9V International Power supply for use with this programmer.

---

6-Way adapters
We now have adapters to convert from the standard Kanda 10-way header to different 6-way headers.
6-Way DIL adapter
6 x 1-way leads
6-Way Micromatch connector

---

A Quick start guide with recommended circuits and setup details can be downloaded here.

---

---

See Overview of Kanda AVR Programmer Range