Selected Product: Programmers/Burners/Hand Held Programmers/Handheld AVR Programmers/AVRHHP-JTAG
Worldwide shipping, easy payment and high quality products. You can rely on Kanda
JTAG Adapter for AVR Handheld Programmer
 |
Order Code AVRHHP-JTAG |
| Price: £7.68 | |
| In Stock | |
JTAG Programmer Adapter for AVR Handheld Programmer
This adapter lets you use the JTAG programming algorithm with the Kanda AVR USB Handheld programmer, with software version v1.2.5 on. See below to link to pinout diagrams for the JTAG Programmer.
JTAG programming works with newer AVR ATmega microntrollers with 40-pins or more and is faster than serial programming. With this adapter one AVR Handheld programmer can do both.
Features - JTAG Programmer
As this is an add-on to the hand held AVR programmer, you get the best of both worlds. The existing serial programming still works for AVR microcontrollers without JTAG or boards without the JTAG interface.
But for new boards, especially if the development has used the JTAG programmer interface, you get a seamless transition to production - and much faster programming speeds.
To swap between modes, you just need to connect the adapter to the programmer and choose JTAG in the new software. To swap back, remove the adapter and unselect JTAG.
Typical Speeds - JTAG Programmer
Device support - JTAG Programmer
All AVR ATmega devices with JTAG interface. This is devices with 40-pins or more.
The JTAG Programmer supports voltages down to 1.8V, so all low voltage variants are covered.
Related Products
AVR Handheld Programer
See JTAG Pinout diagrams for Handheld Programmer
This adapter lets you use the JTAG programming algorithm with the Kanda AVR USB Handheld programmer, with software version v1.2.5 on. See below to link to pinout diagrams for the JTAG Programmer.
JTAG programming works with newer AVR ATmega microntrollers with 40-pins or more and is faster than serial programming. With this adapter one AVR Handheld programmer can do both.
Features - JTAG Programmer
As this is an add-on to the hand held AVR programmer, you get the best of both worlds. The existing serial programming still works for AVR microcontrollers without JTAG or boards without the JTAG interface.
But for new boards, especially if the development has used the JTAG programmer interface, you get a seamless transition to production - and much faster programming speeds.
To swap between modes, you just need to connect the adapter to the programmer and choose JTAG in the new software. To swap back, remove the adapter and unselect JTAG.
Typical Speeds - JTAG Programmer
| Serial | JTAG | |
| ATmega128 Program | 27s | 14s |
| ATmega128 Program and verify | 49s | 25s |
| ATmega2561 Program | 50s | 38s |
| ATmega2561 Program and verify | 134s | 109s |
Device support - JTAG Programmer
All AVR ATmega devices with JTAG interface. This is devices with 40-pins or more.
The JTAG Programmer supports voltages down to 1.8V, so all low voltage variants are covered.
- ATmega32
- ATmega16
- ATmega64
- ATmega128
- ATmega162
- ATmega169
- ATmega165
- ATmega325
- ATmega3250
- ATmega645
- ATmega6450
- AT90CAN128
- AT90CAN32
- AT90CAN64
- ATmega329
- ATmega3290
- ATmega649
- ATmega6490
- ATmega640
- ATmega1280
- ATmega1281
- ATmega1284
- ATmega2560
- ATmega2561
- ATmega164
- ATmega324
- ATmega644
- AT90USB646
- AT90USB1286
Related Products
AVR Handheld Programer
See JTAG Pinout diagrams for Handheld Programmer
Documentation
This opens in a new window.
Related Products
 Handheld AVR Programmer USB Starter Kit |  USB AVR Handheld AVR Programmer |
We accept bank transfer and the following payment types:
Checkout from Shopping Basket to request Proforma Invoice for bank transfer or to pay by credit card or Paypal
