Selected Product: Chips ICs and Modules/USB/UMP1
USB to Parallel Module mk1 Order Code: UMP1 Price: $29.00
USB to Parallel Module1
Free Drivers and Application Examples
UMP1 is an USB->Parallel 8-bit FIFO interface module based on the FT8U245AM chip made by FTDI. It enables very easy connection of your application to the PC via the USB port, without needing any deep knowledge of the complicated USB protocol.
Module Features
UMP1 is manufactured as a DIP24 device (0.6" width) using the standard pin distance of 2.54 mm (0.1"). It can be put into standard or precision DIP socket or it can be directly soldered to your application PCB. It saves time and money in small scale production.
Drivers
The great advantage of this FTDI based USB solution is that the drivers are freely available on the Internet. The supported operating systems are Windows 98SE/ME/2K/XP, Mac and Linux. Software examples for Borland Delphi, C++ Builder and Microsoft Visual C++ and Visual Basic are available as well. There are two types of drivers - Virtual COM port (emulates the standard COM port, with accessibility via the standard COM functions) and direct drivers with functions such as FT_Open, FT_Close, FT_ResetDevice, FT_Write, FT_Read, FT_GetStatus, FT_SetBaudRate, FT_SetFlowControl, FT_SetDTR, FT_ClrDTR, ...
To obtain the drivers and get more information and application examples, Go to FTDI website
UMP2 modules include a serial EEPROM. These are 8-pin DIP packages
Free Drivers and Application Examples
UMP1 is an USB->Parallel 8-bit FIFO interface module based on the FT8U245AM chip made by FTDI. It enables very easy connection of your application to the PC via the USB port, without needing any deep knowledge of the complicated USB protocol.
On the USB side of UMP1 there are 2 signals D+ and D-, on the opposite side there is an 8-bit bidirectional bus and 4 handshaking signals (at TTL level) for data flow control. UMP1 is capable of transfering data at speeds up to 1 MByte per second. UMP1 supports the addtion of an external EEPROM (93C46) for storing the ID data (VID, PID, ID string).
Module Features
UMP1 is manufactured as a DIP24 device (0.6" width) using the standard pin distance of 2.54 mm (0.1"). It can be put into standard or precision DIP socket or it can be directly soldered to your application PCB. It saves time and money in small scale production.
The UMP1 module does not include a USB connector, so the designer has flexibility in PCB layout and mechanical design in comparison with modules that include a built-in USB connector. Also, A-type, B-type connector or even a cable connection can be used.
Drivers
The great advantage of this FTDI based USB solution is that the drivers are freely available on the Internet. The supported operating systems are Windows 98SE/ME/2K/XP, Mac and Linux. Software examples for Borland Delphi, C++ Builder and Microsoft Visual C++ and Visual Basic are available as well. There are two types of drivers - Virtual COM port (emulates the standard COM port, with accessibility via the standard COM functions) and direct drivers with functions such as FT_Open, FT_Close, FT_ResetDevice, FT_Write, FT_Read, FT_GetStatus, FT_SetBaudRate, FT_SetFlowControl, FT_SetDTR, FT_ClrDTR, ...
To obtain the drivers and get more information and application examples, Go to FTDI website
UMP2 modules include a serial EEPROM. These are 8-pin DIP packages
Product Accessories
 USB to Parallel Module mk2 |
