GP-20 Universal Programmer with standalone mode
This 48-pin programmer is for a wide range of devices (45,000+), including PIC microcontrollers, EEPROMs, dsPIC, AVR, ATmega and other microcontrollers like AT89, plus PLDs and flash memory.
The GP-20 has PC connection and
standalone mode - once programmer is loaded, just insert the device and program using button.
It is very fast because it has USB 2.0 interface for Hi-speed data transfer.
The
full device support can be seen here, in new window.
Device support in Standalone mode is smaller and can be seen here.
Other Universal Programmers in the range also support Microchip devices or just memory.
See
Wellon Programmer Range for an overview of all Wellon universal programmers.
Standalone Universal Programmer Features
- USB 2.0 for much faster programming
- Standalone Mode with Go button
- Dimension:160*180*32mm,weight:425g.
- 48 Pin ZIF socket with universal pin-drivers.
- USB Interface so programmer can be used with LAPTOPS, PC, PS/2 or compatibles
- Accepts most compiler outputs in JEDEC format including ABEL, CUPL, PALASM, TANGO PLD, OrCAD PLD, PLD Designer and ISDATA
- Manages 16 and 32-bit word split (Set Programming)
- Features Test Vector capability and multiarray fuse map editor
- Test TTL/CMOS logic ICs and Dynamic/Static Random Access Memory devices
- Optimum programming for each individual device
- Auto identifies TTL/CMOS logic IC
- Automaticly identifies the manufacturer and type of E(E)PROMs
- Support 1.5v Low voltage devices
- Device insertion and poor-pin-contact check
- Adapters are not needed for DIL devices
- Universal DIP, PLCC, QFP, TSOP, PSOP, SOIC, SSOP, SDIP adapters available
- Mass Production mode starts programming automatically on detection of chip insertion
- Super programming speed.
- Supports WindowsXP/2000/Vista/Windows 7 (32 and 64-bit)
Software Features
The software is very comprehensive, with lots of features that make it ideal for both production and development.
- SELECT device includes package information, adapter type, part number description etc.
- LOAD file supports checksums, comprehensive file formats and address location
- Flexible Verify options, including VCC+/-10%
- Blank check, Erase, Program, verify, Auto Program, buffer edit and much more
- Serial numbers and statistics
The Programming software can be downloaded here - 25MB
Download Program
Device support and Socket Convertors
PROM: N/CMOS E(E)PROM, SeriesE(E)PROM, and FLASH Memory
PLD: CPLD, EPLD, GAL,PEEL,PALCE and more
Microcontroller: Atmel, Intel, Microchip, Signetics, Zilog, etc.
IC TEST:
TTL (74 series), CMOS (40/45 series) Logic IC
DRAM (4164, 41464 ...), SRAM (2114, 6116 ...) memory device
The
full device support can be seen here. The device support list includes information for socket adapters required for different packages.
Device support in Standalone mode is smaller and can be seen here.
Adapter list
Standalone Mode
The GP-20 can be used as a normal universal programmer connected to PC or in standalone mode. In this mode, you load the programmer from PC and then just press Go button on programmer to carry out programming operations.
Standalone mode can be set to conventional mode where you press the GO button to program the next device or into Mass Production mode. In this mode, once GO button is pressed once, inserting a new chip will automatically start the program cycle.