Handheld AVR Programmer - LPT Port

256K Hand Held AVR Programmer for AVR

Replacement for original AVR Handheld Programmer - HH0020M - same software, same operation, completely compatible

---

HandHeld AVR Programmer, for Field and Production use, for AVR microcontrollers with up to 256KB of code and Data memory. Just load the programmer from a PC using the AVR Programmer Starter Kit which is on special offer.
Now you just plug it into your target board and program/verify Flash and/or EEPROM with a single button press. It can supply power to your target device using internal battery or 9V external Power supply - 0-5V Vcc, up to 150mA with over-current trip - or can draw power from the target circuit.
This handheld AVR programmer is ideal for non-technical operatives as no mistakes can be made - just press the button and the correct code MUST be loaded.

You can set it to program the whole AVR microcontroller or just the Flash memory so EEPROM data is preserved, or you can program just the EEPROM which makes it ideal for configuration or QA data.

---

This version has firmware for parallel port PC loader. If used with a parallel interface, it will ask to do a firmware upgrade. Just agree and the firmware version will be changed.

Features

• Hand-held AVR Programmer uses 9V battery or power supply
• 256KB of program code space
• Single button operation
• Load target code with simple Wizard Software
• Load it once, program targets for ever
• Reload new programs as often as you need
• Holds program code indefinitely
• Supports all AVR Fuse and Lock bits
• Program/Verify Flash or EEPROM or both
• Supports programming from 1.8V - 5.5V, depending on target AVR Voltage range
• Can power target AVR microcontroller (up to 150mA) or can draw power from target
• Error indicator with red/green LED
• Dimensions: Metric- 106mm x 58mm x 25mm
• Dimensions: Imperial - 4.5 x 2.5 x 1 inches

---

This AVR programmer should be used with Atmel recommended ISP circuits.
See Guide to AVR ISP Circuits for schematics of recommended AVR ISP circuits (new window).

AVR Microcontroller Support

Supports all Low Voltage (L, P, PA, V) AVR Devices as well

• AT90S1200, AT90S2313, AT90S2323, AT90S2343, AT90S4433, AT90S4414, AT90S8535, AT90S8515
• ATmega16, ATmega161, ATmega162, ATmega163, ATmega164P, ATmega165, ATmega168, ATmega169
• ATmega32, ATmega323, ATmega324P, ATmega325, ATmega3250, ATmega329, ATmega3290
• ATmega48, ATmega88, ATmega8, ATmega8515, ATmega8535
• ATmega64, ATmega644, ATmega644P, ATmega645, ATmega6450, ATmega649, ATmega6490, ATmega640
• ATmega128, ATmega1280, ATmega1281, ATmega1284P, ATmega2560, ATmega2561
• ATtiny26, ATtiny261, ATtiny461, ATtiny861
• ATtiny13, ATtiny2313, ATtiny24, ATtiny25, ATtiny44, ATtiny45, ATtiny84, ATtiny85
• AT90CAN32, AT90CAN64, AT90CAN128, CANDIPM162, CANDIP8515, AT90PWM2/3, AT90PWM316

---

You will need a Starter Kit to load this AVR programmer. One Starter Kit will allow you to load as many Hand Held AVR Programmers as you want. The Starter kit comes complete with one AVR Hand Held Programmer and is on Special Offer.
AVR Programmer Starter Kit

---

If you do not want to use the internal 9V PP3 battery, the power supply required is 9V with a 2.5mm Barrel connector. These are available on the shop.
9V International Power supply for use with this programmer.

6-Way adapters

We now have adapters to convert from the standard Kanda 10-way header to different 6-way headers.
6-Way DIL adapter
6 x 1-way leads
6-Way Micromatch connector

USB Version available

USB Starter Kit

---

See Kanda AVR Programmer Range

See Guide to AVR ISP Circuits for schematics of recommended AVR ISP circuits (new window).