Selected Product: Programmers/Burners/Keyfob Mini Programmers/Keyfob PIC Programmers/PIC-KF0030
Worldwide shipping, easy payment and high quality products. You can rely on Kanda
Keyfob PIC Programmer Multipack
 |
Order Code PIC-KF0030 |
| Price: £176.00 | |
| In Stock | |
Keyfob PIC Programmer Multi-Pack
A Pack of 5 individual keyfob PIC programmers for In System Programming of PIC flash microcontrollers in PIC16F and PIC18F families. Ideal for field and production programming. Each PIC programmer comes in a key fob case and has one button operation to eliminate operator errors. Removes the need for a PC on the production line or in the field. This Multi-Pack deal gives you big savings.
Just load using the parallel port Keyfob PIC Programmer Starter Kit Once the Keyfob PIC programmer is loaded, just keep plugging it into your target boards and program/verify Flash and EEPROM with a single button press.
Five Keyfob PIC Programmers
with these features
PIC microcontroller Support
The PIC Keyfob Programmer does not power target, so it is not suitable for all applications - please see Limitations section below.
PIC18F microcontrollers
All released PIC18F devices except J and K series.
The PIC Keyfob Programmer does not support PIC18FxxJxx or PIC18FxxKxx microcontrollers.
For support for J and K series please see Handheld PIC Programmer
PIC16F microcontrollers at 5V only
See Handheld PIC Programmer for low voltage support
PIC16F Support - HVP + LVP
Keyfob PIC Programmer Features
Limitations
As the Keyfob PIC programmer draws power from the target circuit, it operates at the target voltage, down to 3V. However, the BULK ERASE command on the PIC microcontrollers will not work below 4.5V. So, if your target voltage is below 4.5V locked devices cannot be re-programmed. PIC16F microcontrollers need at least 4.5V in all cases. We recommend the Handheld PIC programmer for low voltage applications as it can power the target.
The maximum code size is 64KB. For larger devices, please use handheld PIC Programmer, which has a maximum code size of 256KB.
In HVP mode, if the configuration bits are set for internal master clear and internal oscillator, the PIC microcontroller will start to execute code before entering the program mode because the MCLR pin will not hold it in reset. Also, if RB6 and/or RB7 are configured as outputs by the program there may be contention between these pins and the PIC programmer preventing the device from entering the program mode properly.
The Keyfob PIC Programmer is NOT designed to cope with faulty target boards, so you should test or isolate target boards first, or use the Handheld PIC Programmer instead.
Related Products
You will need a Starter Kit to load these Keyfob PIC programmers. One Starter Kit will allow you to load as many Keyfob PIC Programmers as you want. The Starter kit comes complete with a Keyfob PIC Programmer.
Keyfob PIC Programmer Starter Kit
You can also buy the Starter Kit with 5 Keyfob PIC Programmers, giving you the PC interface, software and Six PIC programmers.
Keyfob PIC Programmer Field Service Pack
Extra Keyfob PIC Programmers are available individually.
Keyfob PIC Programmer
Hand held PIC Programmer
The Handheld PIC Programmer has these advantages:
For an overview of our PIC Programmer range, please see PIC Programmer Overview in new window
A Pack of 5 individual keyfob PIC programmers for In System Programming of PIC flash microcontrollers in PIC16F and PIC18F families. Ideal for field and production programming. Each PIC programmer comes in a key fob case and has one button operation to eliminate operator errors. Removes the need for a PC on the production line or in the field. This Multi-Pack deal gives you big savings.
Just load using the parallel port Keyfob PIC Programmer Starter Kit Once the Keyfob PIC programmer is loaded, just keep plugging it into your target boards and program/verify Flash and EEPROM with a single button press.
Five Keyfob PIC Programmers
with these features
- Easy to load from PC
- Single button operation
- Dimensions: Metric- 45mm x 35mm x 15mm - 28g
- Dimensions: Imperial - 1.8 x 1.4 x 0.5 inches - 1 oz
- Powered by target circuit
- Reprogram as many times as you need
- Holds program code indefinitely
- High Voltage and Low Voltage Programming Modes
- 10-way DIL interface and 6 x 1-way flying lead adapter
- Inline 12V VPP generator
PIC microcontroller Support
The PIC Keyfob Programmer does not power target, so it is not suitable for all applications - please see Limitations section below.
PIC18F microcontrollers
All released PIC18F devices except J and K series.
The PIC Keyfob Programmer does not support PIC18FxxJxx or PIC18FxxKxx microcontrollers.
For support for J and K series please see Handheld PIC Programmer
PIC16F microcontrollers at 5V only
See Handheld PIC Programmer for low voltage support
PIC16F Support - HVP + LVP
- PIC16F87x
- PIC16F627
- PIC16F628
- PIC16F627A, PIC16F628A, PIC16F648A (HVP mode programming only if Reset pin is not reprogrammed as I/O)
- PIC16F818
- PIC16F819
- PIC16F87
- PIC16F88
- PIC16F873A
- PIC16F874A
- PIC16F876A
- PIC16F877A
- PIC16F84A
- PIC16F83
- PIC16F84
- PIC16F7x
- PIC16F7x7
- PIC16F63x
- PIC16F68x
- PIC16F690
- PIC16F91x, PIC16F946
- PIC16F88x
- PIC16F630
- PIC16F676
- PIC16F716
- PIC16F5x
- PIC16F505
Keyfob PIC Programmer Features
- Reprogrammable up to a 1000 times
- Stores code indefinitely
- Battery powered for maximum flexibility
- Single button operation
- Ideal for Field or Production use
- High Voltage and Low Voltage Programming Modes
- Includes inline 12V VPP generator
- 10-way DIL interface and 6 x 1-way flying lead adapter
- 64KB code size
Limitations
As the Keyfob PIC programmer draws power from the target circuit, it operates at the target voltage, down to 3V. However, the BULK ERASE command on the PIC microcontrollers will not work below 4.5V. So, if your target voltage is below 4.5V locked devices cannot be re-programmed. PIC16F microcontrollers need at least 4.5V in all cases. We recommend the Handheld PIC programmer for low voltage applications as it can power the target.
The maximum code size is 64KB. For larger devices, please use handheld PIC Programmer, which has a maximum code size of 256KB.
In HVP mode, if the configuration bits are set for internal master clear and internal oscillator, the PIC microcontroller will start to execute code before entering the program mode because the MCLR pin will not hold it in reset. Also, if RB6 and/or RB7 are configured as outputs by the program there may be contention between these pins and the PIC programmer preventing the device from entering the program mode properly.
The Keyfob PIC Programmer is NOT designed to cope with faulty target boards, so you should test or isolate target boards first, or use the Handheld PIC Programmer instead.
Related Products
You will need a Starter Kit to load these Keyfob PIC programmers. One Starter Kit will allow you to load as many Keyfob PIC Programmers as you want. The Starter kit comes complete with a Keyfob PIC Programmer.
Keyfob PIC Programmer Starter Kit
You can also buy the Starter Kit with 5 Keyfob PIC Programmers, giving you the PC interface, software and Six PIC programmers.
Keyfob PIC Programmer Field Service Pack
Extra Keyfob PIC Programmers are available individually.
Keyfob PIC Programmer
Hand held PIC Programmer
The Handheld PIC Programmer has these advantages:
- Full 256KB code space
- More protection against faulty target circuits
- Powers target at 3.3V or 5V
- Uses Programming Voltage first method of entering Program Mode in HVP
- More device support
For an overview of our PIC Programmer range, please see PIC Programmer Overview in new window
Documentation
This opens in a new window.
Related Products
 Batteries for Keyfob Programmers |  Keyfob PIC Programmer Starter Kit |  10-way to RJ11 Adapter |  USB Handheld PIC Programmer |
We accept bank transfer and the following payment types:
Checkout from Shopping Basket to request Proforma Invoice for bank transfer or to pay by credit card or Paypal
