My Basket:

Your basket is currently empty.


Click to view the full basket.
cosmetic navigation top arrowview the basket
cosmetic side spacer

Selected Product: Programmers/Burners/Hand Held Programmers/PIC Handheld Programmers/PIC-HH0010

PIC Handheld Programmer Starter Kit - Parallel      Order Code: PIC-HH0010      Price: €107.10

 


Starter kit for PIC Hand Held Programmer
Parallel port version
See PIC-HH0010U for USB version
PIC Handheld Programmer with PC interface and software. Load the programmer from a PC using the PC interface and the simple Wizard Software and then you do not need PC again. The PIC Hand Held programmer is completely portable and you just plug it into your PIC target boards and program/verify Code and/or Data with a single button press. Supports PIC16F and PIC18F microcontrollers, and powers target circuit. Has 256KB memory.
Now supports PIC18FxxJxx devices
The PC interface is parallel port. A plug in parallel port card is available if your PC does not have a Parallel Port
PCI Serial and Parallel Card
Software Features
  • supports Windows 95/98/2000/NT/ME/XP
  • simple software
  • Loads Flash, EEPROM, Configuration words and User ID from HEX file
  • Select Low or High Voltage programming
  • Select for Device ID match, configuration word verify, EEPROM Data save and other features
  • click finish to load your PIC programmer
Starter Kit contents
  • PIC Hand Held Programmer
  • PC Interface (parallel port, LPT1)
  • Programmer adapter for loading code and settings
  • Ribbon cables with 10-way connector
  • Software CD
  • Supplied in case
    PIC Programmer Features
    • PIC Hand-held programmer uses 9V PP3 battery or power supply
    • Single button operation
    • Load it once, program targets for ever
    • Reload new programs as often as you need
    • Holds program code indefinitely
    • Low or High Voltage programming
    • 10-way DIL and 6 x 1-way flying lead connectors included
    • Program/Verify Flash or EEPROM or both
    • Program and verify Configuration Bytes and User ID
    • Existing EEPROM Data can be preserved
    • Powers target device (up to 150mA) at 5V regardless of target voltage (so that Bulk Erase command always works)
    • Dimensions: Metric- 106mm x 58mm x 25mm
    • Dimensions: Imperial - 4.5 x 2.5 x 1 inches
    PIC Microcontroller Support
    All released PIC18F microcontrollers including PIC18FxJx. Updates available for new device support.

    PIC16F Microcontrollers
    • PIC16F627
    • PIC16F628
    • PIC16F627A, PIC16F628A, PIC16F648A (HVP mode programming only if Reset pin is not reprogrammed as I/O)
    • PIC16F636, PIC16F639, PIC16F684, PIC16F688
    • PIC16F7x
    • PIC16F7x7
    • PIC16F785
    • PIC16F818
    • PIC16F819
    • PIC16F8x
    • PIC16F8xA
    • PIC16F87x
    • PIC16F873A
    • PIC16F874A
    • PIC16F876A
    • PIC16F877A
    • PIC16F88x
    • PIC16F91x
    Note: Not all devices have LVP mode

    Not supported
    • PIC16F630
    • PIC16F676
    • PIC16F716 - will be supported
    • PIC16F5x - will be supported
    • PIC16F505
    Extra PIC Hand Held Programmers You only need one starter kit for as many PIC programmers as you require
    If you do not want to use the internal 9V PP3 battery, the power supply required is 9V with a 2.5mm Barrel connector. These are available on the shop.
    9V International Power supply for use with this PIC handheld programmer.

    A Quick start guide with recommended circuits and setup details can be downloaded here.


    datasheet
    This opens in a new window.


    Product Accessories



    Batteries for Handheld Programmer

    9V International Wall Transformer

    PIC Handheld Programmer - Parallel Port


    •  

    basket here