Comments on: What is AVR microcontroller? https://www.kanda.com/blog/microcontrollers/avr-microcontrollers/avr-microcontroller/ Microcontrollers, training, electronics and coding Wed, 31 Jan 2018 13:12:24 +0000 hourly 1 https://wordpress.org/?v=6.4.3 By: Kanda Admin https://www.kanda.com/blog/microcontrollers/avr-microcontrollers/avr-microcontroller/#comment-1253 Thu, 13 Nov 2014 12:39:53 +0000 http://www.kanda.com/blog/?p=165#comment-1253 In reply to michael.

Surely blogs should have an opinion? Atmel are the only company who design and manufacturer AVR microcontrollers, although other products are called AVR such as some amplifiers but they are not microcontrollers . Why does it matter what AVR stands for? The accepted opinion is that they stand for Alf and Vergart’s Risc, after the original Norwegian designers of the chip but this is not confirmed by Atmel. But how does that help in understanding what it is?

]]>
By: michael https://www.kanda.com/blog/microcontrollers/avr-microcontrollers/avr-microcontroller/#comment-1252 Thu, 13 Nov 2014 00:12:27 +0000 http://www.kanda.com/blog/?p=165#comment-1252 This is all well and good, but pretty opinionated. Amtel is by far NOT the only maker of AVR’s, tho that is what you imply. But more importantly, you have not even answered the basic question being asked: What is an AVR? What do the letters stand for, for example??????

]]>
By: Jan https://www.kanda.com/blog/microcontrollers/avr-microcontrollers/avr-microcontroller/#comment-1126 Wed, 13 Aug 2014 21:09:10 +0000 http://www.kanda.com/blog/?p=165#comment-1126 We use two pins of the microcontroller to drive the brigde. These pins alternate between being +5V/GND and GND/+5V. So effectively, it looks like a 10V peak-to-peak square wave of AC voltage. This technique helps reduce the noise because electronic components tend to have significantly more noise at lower frequencies, which is called 1/f noise, as well as DC offsets. Hope that helps!

]]>
By: Priyank Namdev https://www.kanda.com/blog/microcontrollers/avr-microcontrollers/avr-microcontroller/#comment-1058 Sat, 19 Jul 2014 01:09:01 +0000 http://www.kanda.com/blog/?p=165#comment-1058 Thnx. ..it really helps…

All basics are at place with nicely teached…

]]>